
Dubbing a tape
Dubbing a tape
When connecting with the A/V connecting cable
•Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.)
•Press the following buttons to make the indicator disappear so that they will not be superimposed on the edited tape:
On your camcorder:
DISPLAY/BATT INFO, DATA CODE On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
The POWER switch should be set to .
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.
(2) Prepare the VCR for recording. If your VCR has an input selector, set it to the input mode. Refer to the operating instructions of the VCR.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
Refer to the operating instructions of your VCR.
When you have finished dubbing the tapePress x on both your camcorder and the VCR.
If you record a paused playback picture
•The recorded picture becomes rough with the DV Interface.
•The picture may jitter when you play back the picture using other video equipment.
Copie d’une cassette
Copie d’une cassette
En cas de raccordement avec le cordon de liaison audio/vidéo
•Réglez DISPLAY sur LCD sous dans les paramètres du menu. (Le réglage par défaut est LCD.)
•Appuyez sur les touches suivantes pour faire disparaître l’indicateur afin qu’il ne soit pas incrusté sur le montage de la cassette :
Sur le caméscope :
DISPLAY/BATT INFO, DATA CODE Sur la télécommande :
DISPLAY, DATA CODE, SEARCH MODE
. | Editing |
Le commutateur POWER doit être réglé sur |
|
| / |
(1) Insérez une cassette vierge (ou une cassette | Montage |
| |
que vous souhaitez réenregistrer) dans le |
|
magnétoscope et une cassette enregistrée dans |
|
le caméscope. |
|
(2) Préparez le magnétoscope pour |
|
l’enregistrement. Si votre magnétoscope |
|
possède un sélecteur d’entrée, |
|
mode entrée. |
|
Consultez le mode d’emploi du magnétoscope |
|
pour plus d’informations. |
|
(3) Reproduisez la cassette enregistrée sur le |
|
caméscope. |
|
(4) Démarrez l’enregistrement sur le |
|
magnétoscope. |
|
Consultez le mode d’emploi du magnétoscope |
|
pour plus d’informations. |
|
Appuyez sur x sur le caméscope et sur le magnétoscope.
Si vous enregistrez une image de lecture en pause
•L’image enregistrée manque de précision avec l’interface DV.
•Elle risque d’être instable si vous la reproduisez sur un autre appareil vidéo.
101