Step 1 Preparing the power source

Etape 1 Préparation de la source d’alimentation

Note

Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC Adaptor. This may cause a short-circuit, damaging the AC Adaptor.

When you use the AC Adaptor

Place the AC Adaptor near a wall socket. While using the AC Adaptor, if any trouble occurs with this unit, disconnect the plug from a wall socket as soon as possible to cut off the power.

Note on the CHARGE lamp

The CHARGE lamp flashes in the following cases:

The battery pack is not properly installed.

Something is wrong with the battery pack.

Remarque

Evitez tout contact des parties métalliques de la fiche CC de l’adaptateur secteur avec des objets métalliques. Ceci pourrait entraîner un court- circuit et endommager l’adaptateur secteur.

Lors de l’utilisation de l’adaptateur secteur

Placez l’adaptateur secteur à proximité d’une prise murale. En cas de problème, débranchez immédiatement la fiche de la prise murale pour couper l’alimentation.

Remarque à propos du témoin CHARGE Le témoin CHARGE clignote dans les cas suivants :

La batterie n’est pas installée correctement.

La batterie est défectueuse.

Préparatifs / Started Getting

27