
English
Warning indicatorsIf indicators appear on the screen, check the following: See the page in parentheses “( )” for details.
Slow flashing:
•The file is corrupted. •The file is unreadable.
•You are trying to carry out MEMORY MIX on a moving picture (p. 152).
C:21:00
EThe battery pack is dead or nearly dead
Slow flashing:
•The battery pack is nearly dead. Depending on the operating conditions, environmental or battery conditions, the E indicator may flash, even if there are approximately five to 10 minutes remaining.
%Moisture condensation has occurred *
Fast flashing:
•Eject the cassette, set the POWER switch to OFF (CHG), and leave it for about one hour with the cassette lid open (p. 279).
Warning indicator pertaining to Cassette Memory *
Slow flashing:
•No cassette with Cassette Memory is inserted (p. 269).
Warning indicator pertaining to the “Memory Stick”
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing:
•The image cannot be recorded on the “Memory Stick.”*
Warning indicator pertaining to the “Memory Stick” formatting*
Fast flashing:
•The “Memory Stick” data is corrupted (p. 134).
•The “Memory Stick” is not formatted correctly (p. 229).
Warning indicator pertaining to incompatible “Memory Stick”*
Slow flashing:
•An incompatible “Memory Stick” is inserted.
QWarning indicator pertaining to the tape
Slow flashing:
•The tape is near the end. •No cassette is inserted.*
•The
Fast flashing:
•The tape has run out.*
ZYou need to eject the cassette*
Slow flashing:
•The
Fast flashing:
•Moisture condensation has occurred (p. 279).
•The tape has run out.
•The
-The image is protected*
Slow flashing:
•The image is protected (p. 179).
Warning indicator pertaining to the flash Slow flashing:
•During charging
Fast flashing:
•The
•There is something wrong with the
Warning indicator pertaining to still image recording
Slow flashing:
•The still image cannot be recorded on the “Memory Stick” in the current operating conditions (p. 62).
* You hear the melody or beep sound.
254