Adjusting the white balanceRéglage manuel de la balance des
manuallyblancs

 

 

 

When you record under fluorescent lighting Select AUTO or HOLD.

Your camcorder may not adjust the white balance correctly in the INDOOR mode.

In the AUTO mode

Point your camcorder at the white subject for about 10 seconds after setting the POWER switch to CAMERA to get better adjustment when:

You remove the battery pack for replacement.

You bring your camcorder outdoors from the interior of a house holding the exposure, or vice versa.

In the HOLD mode

Set WHT BAL to AUTO and reset to HOLD after few seconds when:

You change the mode of PROGRAM AE.

You bring your camcorder outdoors from the interior of a house, or vice versa.

Lorsque vous filmez sous un éclairage fluorescent

Sélectionnez AUTO ou HOLD.

Le caméscope risque de ne pas régler correctement la balance des blancs en mode

INDOOR.

En mode AUTO

Dirigez le caméscope vers un sujet blanc pendant environ 10 secondes après avoir réglé le commutateur POWER sur CAMERA pour obtenir un meilleur réglage lorsque :

vous retirez la batterie pour la remplacer.

vous apportez le caméscope de l’intérieur de la maison à l’extérieur en conservant la même exposition ou vice-versa.

En mode HOLD

Réglez WHT BAL sur AUTO, puis réglez à nouveau sur HOLD après quelques secondes lorsque :

vous changez de mode PROGRAM AE.

vous apportez le caméscope de l’intérieur de la maison à l’extérieur ou vice-versa.

avancées d’enregistrement Opérations / Operations Recording Advanced

67