
Recording still images on a “Memory Stick” – Memory Photo recording
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly and check the image. The green z indicator stops flashing, then lights up. The brightness of the image and the focus are adjusted, being targeted for the middle of the image, and are fixed. Recording does not start yet.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you press PHOTO deeply is recorded on the “Memory Stick.”
«Memory Stick » – Enregistrement de photos dans la mémoire
Le commutateur POWER doit être réglé sur
.
(1) Appuyez légèrement sur PHOTO et vérifiez l’image. L’indicateur vert z cesse de clignoter, puis s’allume. La luminosité de l’image et la mise au point s’ajustent sur le centre de l’image et les réglages obtenus sont enregistrés. L’enregistrement ne commence pas encore.
(2) Appuyez à fond sur PHOTO. L’enregistrement est terminé lorsque l’indicateur à barres disparaît.
L’image affichée à l’écran alors que vous appuyez sur PHOTO est enregistrée sur le « Memory Stick ».
1 |
| FINE | [a] |
1600 | / 8 | ||
| PHOTO |
| 1 0 1 [b] |
|
|
| |
2 | 1600 | FINE |
|
| PHOTO |
| 1 0 1 |
|
|
|
POWER switch/Commutateur
POWER
VCR
OFF(CHG)
CAMERA
MEMORY
[a] Approximate number of images that can be recorded on the “Memory Stick” *
[b] Number of the folder currently used for recording
* The indication of the number of recordable still images
Depending on the image quality setting and the complexity of the subject, the indication of the remaining number of recordable still images may not change even after you record an image. When the remaining number is greater than 9999, the >9999 indicator appears on the screen.
142
[a] Nombre approximatif d’images pouvant être enregistrées sur le « Memory Stick » *
[b] Numéro du dossier utilisé pour l’enregistrement
* Indication du nombre d’images fixes enregistrables
Selon le réglage de la qualité d’image et la complexité du sujet, l’indication du nombre d’images fixes enregistrables restant peut ne pas changer même après l’enregistrement d’une image.
Lorsque le nombre restant est supérieur à 9 999, l’indication >9999 s’affiche à l’écran.