Sony DCR-TRV60E manual 227

Changing the menu settings

				POWER
Icon/item		Mode	Meaning	switch
	VCR SET
	HiFi SOUND	zSTEREO	To play back a stereo tape or dual sound track tape
			with main and sub sound (p. 271)
		1	To play back the stereo tape with the left sound or a
			dual sound track tape with main sound
		2	To play back a stereo tape with the right sound or a
			dual sound track tape with sub sound
	AUDIO MIX	——	To adjust the balance between stereo 1 and stereo 2
			(p. 124)

		ST1	ST2
A/V t DV OUT zOFF		To output digital images and sound in analogue
		format using your camcorder
	ON	To output analogue images and sound in digital
		format using your camcorder (p. 221)
NTSC PB	zON PAL TV	To play back a tape recorded in the NTSC colour
		system on a PAL system TV
	NTSC 4.43	To play back a tape recorded in the NTSC colour
		system on a TV with the NTSC 4.43 mode
LCD/VF SET
LCD B.L.	zBRT NORMAL To set the brightness on the LCD screen to normal
	BRIGHT	To brighten the LCD screen
LCD COLOUR	——	To adjust the colour on the LCD screen with r/R

		Low intensity	High intensity
VF B.L.	zBRT NORMAL	To set the brightness on the viewfinder screen to
		normal
	BRIGHT	To brighten the viewfinder screen

Note on NTSC PB

When you play back a tape on a Multi System TV, select the best mode while viewing the picture on the TV.

Notes on LCD B.L. and VF B.L.

•When you select BRIGHT, battery life is reduced by about 10 percent during recording. •When you use power sources other than the battery pack, BRIGHT is automatically selected.

Even if you adjust LCD B.L., LCD COLOUR and VF B.L.

The recorded picture will not be affected.

caméscope du Personnalisation / Camcorder Your Customising

(continued on the following page) 227