
Step 1 Preparing the power source
Checking the status of thebattery pack – Battery Info(1) Set the POWER switch to OFF (CHG).
(2) Press OPEN to open the LCD panel.
(3) Press DISPLAY/BATT INFO.
The battery charge level (the percentage of the current remaining battery time to the recording time when fully charged) and remaining battery time when using the LCD screen or viewfinder are displayed for about seven seconds.
If you keep pressing DISPLAY/BATT INFO, the indicator is displayed for about 20 seconds.
Etape 1 Préparation de la source d’alimentation
Vérification de l’état de la batterie rechargeable– Informations sur la batterie(1) Réglez le commutateur POWER sur OFF (CHG).
(2) Appuyez sur OPEN pour ouvrir le panneau LCD.
(3) Appuyez sur DISPLAY/BATT INFO. Le niveau de charge de la batterie (le pourcentage d’autonomie réelle de la batterie en durée d’enregistrement lorsque la batterie est complètement chargée) ainsi que l’autonomie de la batterie lorsque vous utilisez l’écran LCD ou le viseur apparaissent pendant environ sept secondes.
Si vous maintenez la touche DISPLAY/BATT INFO enfoncée, l’indicateur reste affiché pendant environ 20 secondes.
Préparatifs / Started Getting
3
DISPLAY/
BATT INFO
BATTERY INFO
BATTERY CHARGE LEVEL
0% | 50% | 100% |
REC TIME AVAILABLE
LCD SCREEN : 85 min
VIEWFINDER : 100 min
During charging/
Pendant la recharge
BATTERY INFO
BATTERY CHARGE LEVEL
0% | 50% | 100% |
REC TIME AVAILABLE
LCD SCREEN : 110 min
VIEWFINDER : 130 min
Fully charged/
Recharge complète
29