Xerox 5252 manual Color Balance

Scanner

Color Balance

The Color Balance feature, located on the Image Quality screen, allows you to adjust the balance for areas of high, medium, and low density image areas for Cyan, Magenta, Yellow, and Black.

For each color there are three density levels (low, medium, and high). There are three higher settings, three lower settings, and the normal setting within each density level.

Each color can be adjusted independently and in any combination. It is important to remember that adjusting the amount of any of the process colors has an effect on the other colors.

The default value for Color Balance may be set in Tools Mode. Refer to the System Administration Guide (see page 2-95)for more information on how to change this setting.

Figure 5-53

5 Scanner

DocuColor 5252 Operator Manual 5-83