Problem solving
4Slide the Document Guide away from the stack of documents.
5Raise the DADF and remove any documents from the Document Glass.
6Remove any paper that is on the DADF belt.
7Close the DADF.
8Check the documents for damage, creases, and/or folds before reloading them into the Document Feeder Tray.
Note: If a document is damaged, you may have to use Interrupt mode to make a copy from the Document Glass. You can then return to the original job and use the copy instead of the damaged document in the stack of documents you are copying.
9Check the message on the screen to ensure that all jams are cleared.
10 Reload the stack of documents into the Duplex Automatic Document Feeder according to the instructions on the Touch Screen. Reposition the document guide.
11 Press the Start button to restart your copy job.
7 Problem solving
DocuColor 5252 Operator Manual |
