Accessories

Unloading the High Capacity Stacker Stapler

To ensure consistent quality, unload sets of less than four sheets and lighter weight paper after 50 sets are made, or when the curl of the sets inhibits the ability of the sets to exit the HCSS.

When the Stack Tray is full, Fault Code 112-550 appears in the message display on the HCSS. The digital press Touch Screen displays a message, "Unload the Main Tray of the Finisher.”

The HCSS continues to stack sheets into the Stack Tray after the message appears, but excess sheets may have a degraded stacking quality. For best performance, unload the tray when 2,000 sheets have been stacked.

Jam Clearance

A paper jam in the High Capacity Stacker Stapler is indicated by a message on the digital press Touch Screen. The HCSS Control Panel display illuminates the area where the jam has occurred.

1

2

3

6 Accessories

Figure 6-29

DocuColor 5252 Operator Manual

6-43

Page 269
Image 269
Xerox 5252 manual Unloading the High Capacity Stacker Stapler, Jam Clearance