Maintenance
4To open the Reservoir Cap, grasp the tab at the back of the cap and pull it forward.
5Remove the cap from the bottle of Fuser Oil and replace it with the Filler Spout Cap. This cap was provided to you when your digital press was installed. Contact your Xerox service representative if you cannot locate the Filler Spout Cap and need another one.
6Carefully insert the Filler Spout into the opened Fuser Oil Reservoir and squeeze the bottle until the oil reaches the maximum fill level tab visible inside the Reservoir.
7Remove the Filler Cap from the bottle and place it on a cloth or paper towel to drain. Return the original cap to the bottle of Fuser Oil.
8
9
Close the Reservoir Cap, ensuring that it snaps into place.
Close the Right Front Door of the digital press.
9 Maintenance
DocuColor 5252 Operator Manual |
