Paper and Paper Trays

Paper Tray Special Features

Special features help control the environmental conditions in the paper trays to ensure optimum print capability:

Paper Trays 1 and 2 have optional heater kits available.

Paper Tray 3 has a heater underneath the paper tray that can be activated by your Xerox service representative.

Paper Tray 3 has two blowers. The lead edge blower is on at all times and produces heated air if the following selections are made: coated paper, transparencies, or plain paper 28 lb. (106 g/m2) or heavier. The trail edge blower is on at all times and does not produce heated air.

Paper Tray 3 has air adjust levers on the drawer to regulate the amount of air disbursed. If the paper weight is 40 lb. (150 g/m2) or less, the position of the air adjust levers should be toward the front of the tray. If the paper weight is 40 lb. (150 g/m2) or more, the position of the air adjust levers should be toward the rear of the tray.

Figure 4-3

4 Paper and Paper Trays

DocuColor 5252 Operator Manual

4-7

Page 97
Image 97
Xerox 5252 manual Paper Tray Special Features