
Accessories
The Top Tray accepts the following papers:
•All media types, sizes, and weights that are supported by the digital press
•Duplexed 3 hole drilled paper must be fed short edge first, therefore must be sent to the Top Tray
The following illustration shows the paper path for the HCS.
Media types accepted:
Paper weight range for trays:
Top Tray mode
Stack
Mode
Figure
Coated or uncoated stocks, drilled stock, Transparencies and labels (labels can be sent only to the Top Tray)
•Stack Tray: 16 - 59 lb. (64 – 220 g/m2)
•Top Tray: 16 - 59 lb. (64 – 280 g/m2).
6 Accessories
Special notes:
•Special materials may not run as reliably as the baseline paper.
•Transparencies may be run to either the Top Tray or the Stack Tray. Stack height should be limited to 100 transparencies.
DocuColor 5252 Operator Manual |