DocuColor 5252 Operator Manual
Press the Save button.
5
For example, for an 8.5”x11” original, input 8” for the X dimension.
Make sure that the Y dimension is set to equal the length of the original being copied.
Select Original Input on the Added Features screen. Select Manual Input and Custom Size.
Choose the appropriate paper tray in the Paper Supply column on the Basic Features screen.
1
2
3
4 Change the X dimension to a size equal to the width of the original minus the edge amount for the holes.
Edge Erase for Drilled Paper
Edge Erase can be used to erase the black holes created when copying an original that is printed on drilled paper. This can be used for 1-Sided and 2-Sided scan to print jobs from the Duplex Automatic Document Feeder (DADF).
Using the Edge Erase feature for this purpose may cause some image loss on the opposite side of the document.
Use the following procedure to use Edge Erase to erase black holes on output:
