Scanner
Transparency Options
Transparency Options allows you to do the following:
•Transparency Set produces a single set of transparencies with a designated number of sets of paper output. Only one set of transparencies is produced regardless of the number of paper sets requested.
•Transparency Set + Dividers produces a single set of transparencies + dividers with a designated number of sets of paper output. Only one set of transparencies is produced regardless of the number of paper sets required.
•Dividers Only produces a continuous stream of dividers to be incorporated into a job programmed for transparencies only. This is the option to choose if you are running multiple sets of transparencies and require a divider to be inserted between each set.
Off is the permanent default for Transparency Options. The default cannot be changed in Tools Mode.
Tray 3 is automatically selected when Transparency Options is selected. Transparencies should be run from Tray 3 ONLY. Any other tray may be selected for Dividers. If Transparency Options is selected and paper is in Tray 3, a message appears in the message area on the Touch Screen indicating that transparencies must be loaded into Tray 3.
Collated must be selected on the Basic Features screen for the Transparency Options button to appear. The Transparency Options feature cannot be used in combination with the Covers, Inserts, Booklet Creation, or Poster features.
DocuColor 5252 Operator Manual |
