Xerox manual DocuColor 5252 Operator Manual

Scanner

Note: Options are programmed independently for each individual segment. Therefore, after this segment is programmed and the Start button is pressed, all options will return to the default settings. You will have to program the desired options each time you scan a segment.

7When you are finished selecting options for this segment, press the Start button.

Repeat steps 6 and 7 for each segment or press the Build Job Controls button, described in steps 8 through 10, to access features available after each segment is scanned.

8Press the Build Job Controls button at the top-right corner of the screen. The Build Job Controls screen is displayed.

Figure 5-81

5-114 DocuColor 5252 Operator Manual