Xerox 5252 manual Paper specifications for stapling

Accessories

Paper specifications for stapling

The following chart shows the stapling details for paper size, orientation, destination, and staple position. Numbers have been rounded up or down.

Staple Positions marked with an "O" may
be selected in the position indicated.
Positions marked with an "x" are not
available for stapling.			Output	Staple Position			Output
*These items have the following limitation:			Destination				Destination
Papers that are 210 mm (8.3 in.) in the feed
direction must be greater than 80 g/m2 in
weight.
		Sheet	HCSS Stack				HCSS Top
Inches	MM		Tray	Front	Rear		Tray
		Orientati
			64-220 g/m2			Dual	64-280 g/m2
		on		corner	corner
			(stapling)				(no stapling)
7.2 x 10.1	JIS B5 (182 x	SEF	Yes	O	x	x	Yes
	257)
8.3 x 11.7	A4 (210 x 297)	SEF	Yes	O	O	x	Yes
8.5 x 11	216 x 279	SEF	Yes	O	O	x	Yes
8.5 x 13	216 x 330	SEF	Yes	O	O	x	Yes
8.5 x 14	216 x 356	SEF	Yes	O	O	x	Yes
10.1 x	JIS B4 (257 x	SEF	Yes	O	x	x	Yes
14.3	364)
11 x 17	279 x 432	SEF	Yes	O	x	O	Yes
11.7 x	A3 (297 x 420)	SEF	Yes	O	x	O	Yes
16.5
12 x 18	305 x 457	SEF	No	--	--	--	Yes
12.6 x	320 x 450	SEF	No	--	--	--	Yes
17.7
7.2 x 10.1	B5 (182 x 257)	LEF	Yes *	O	x	x	Yes *
8 x 10	203 x 254	LEF	Yes *	O	x	x	Yes *
8.3 x 11.7	A4 (210 x 297)	LEF	Yes	O	x	O	Yes
8.5 x 11	216 x 279	LEF	Yes	O	x	O	Yes
10.5 x	Kai 8 (267 x	SEF	Yes	O	x	x	Yes
15.3	388) Asian
	market size
10.5 x 7.6	Kai 16 (267 x	LEF	Yes *	O	x	x	Yes *
	194) Asian
	market size

6 Accessories

DocuColor 5252 Operator Manual 6-41