Overview
Circuit Breaker
The digital press is equipped with an additional safety circuit breaker. This device will trip if there is an electrical overload.
Ecology Module
Circuit Breaker
Figure
In the case of a building power outage, the digital press should be powered on as soon as possible after the power is restored, and a print should be made to ensure that no damage to the digital press has occurred.
If power to the digital press fails to return, do the following:
1Locate the circuit breaker on the back of the digital press on the electrical module next to the toner waste bottle.
2If the device has been tripped, the switch will be in the Off position (down). Flip the switch up to the ON position.
Note: If the Circuit Breaker trips again, or if power is not restored by the above procedure, call your Xerox service representative.
DocuColor 5252 Operator Manual |
