Scanner

Build Job

Build Job allows you to program, scan, and store individual job segments of a large or complex copy job, and then print all the segments as one complete job. This feature is useful when you have copy jobs containing more than fifty originals. Segments are programmed as if they were ordinary, independent jobs, and scanning is initiated for each segment by pressing the Start button.

When you press the Save button, the Build Job screen closes, and control reverts to the Basic Features screen. A new button, Build Job Controls, appears at the top right of all primary screens. Press this button to access features that are available after a segment is saved.

Output must be Collated, and a specific Paper Tray must be selected on the Basic Features screen for the Build Job button to appear on the Job Assembly screen. The Build Job feature cannot be used in combination with the Inserts, Covers, or Poster options.

1Touch the Build Job button on the Job Assembly screen. The Build Job screen is displayed.

Figure 5-79

5-112

DocuColor 5252 Operator Manual

Page 220
Image 220
Xerox 5252 manual Build Job