Xerox 5252 manual Fuser is extremely hot

Overview

	Part		Description
Control Panel		Allows keypad selection of features. Refer to the
		Control Panel section in this chapter.
Dry Ink/Toner		Contains the Dry Ink/Toner cartridges.
Compartment
Offset Catch		Receives completed print job. Sets are offset for
Tray (OCT)		easy separation. Maximum capacity is 500 sheets
		of 24 pound (90 g/m2) paper.
Right/Left Front		Houses the image transfer system for simplex and
Doors		duplex printing. Open to clear jams in the paper
		path in the Printing Module and at the Fuser.
		Follow the instructions precisely for clearing a jam
		in the Fuser.
		Caution:	The Fuser is extremely hot and
		will cause injury if clearing jam instructions are
		not followed.
Exit Module		Contains the decurler and the inverter. The
		decurler removes any curl from the printed page.
		The inverter is used when duplexing or face down
		output is selected.
Ground Fault		Not shown in Figure 3-1, refer to Figure 3-5. This
Indicator (GFI)		device trips if an interruption is detected in the
Circuit Breaker		power to the digital press.

3-4 DocuColor 5252 Operator Manual