Xerox 5252 manual Problem Suggested Solution

Problem solving

Problem	Suggested Solution
The Control Panel Touch Screen	• Press Clear All on the Control Panel.
does not respond to a touch	• Touch a selectable button on the Touch Screen. A slight
command.
	pressure is required to cause the digital press with scanner to
	react.
	• If the problem persists, open the Front Door of the digital press
	with scanner. Close the Front Door and make a selection on
	the Touch Screen. If the Touch Screen does not respond to any
	touch commands, switch off the power. Wait 15 seconds. Then
	switch on the power. Reprogram the digital press with scanner
	for the copy features that are desired.
You cannot program a job while a	Jobs cannot be programmed or copies made while some screens,
screen is open.	such as administration screens, jam clearance screens, or
	consumable status information screens, are open. Follow the
	directions on the information screen. Then program the desired job.
Digital press with scanner features	Certain features cannot be selected because of the previous
are not selectable.	selections. Generally, features or buttons you can select appear
	selectable to indicate you can use them with the previous
	selections. Refer to the “Overview” chapter for more information
	about buttons (see page 3-11).
Transparencies	• Load the transparencies by following the instructions in
	Chapter 4, “Paper and Paper Trays (see page 4-9).
Transparencies are too oily.	• Make 5 blank sheet copies with the Full Color option on paper
	stock to purge excess oil from system. Reload the
	transparencies and continue the copying job.
	• Refer to the Recommended Materials List and the Color
	Materials Usage Guide for more information about
	transparencies.

7 Problem solving

DocuColor 5252 Operator Manual 7-3