Accessories
Fault Code | Cause | Solution |
|
|
|
212 302 | Top Cover open | 1. Open Top Cover |
|
| 2. Close the Top Cover |
|
| If the |
|
| Cover is firmly closed. |
|
|
|
212 540 | Stacker tray full | Empty the Stacker Tray. |
|
|
|
212 541 | Stacker tray position | Press the Unload button. The Wait light blinks until the |
|
| Stacker Tray has reached the down position. |
|
| When the Stacker Tray has reached the down position, open |
|
| the front door. |
|
| Remove the Stacker Cart. |
|
| Remove all stacked paper. |
|
| Position the Stacker Cart securely into the EHCS. |
|
| Close the front door. |
|
|
|
212 542 | No Stacker Cart | Open the front door. |
|
| Remove the Stacker Cart from the EHCS. |
|
| Position the Stacker Cart securely into the EHCS. |
|
| Close the front door |
|
|
|
212 544 | Door open | Close the door |
|
|
|
Ready Indicator | No power | • Check the power cord connected to the power source. |
does not illuminate |
| • Check that the GFI circuit breaker is not tripped (rear |
|
| cover). |
|
| • Check that the main switch is on. |
|
|
|
Poor Stacking | Mixed sizes of paper | Run separate jobs and empty stacker. |
|
|
|
| High paper curl | • Adjust digital press decurler. |
|
| • Flip paper in digital press paper tray(s). |
|
| • Rotate paper in the digital press paper tray(s). |
|
|
|
| Mechanical | • Check for obstruction in the stacker paper path. |
| obstruction | • Ensure that all transports and baffles are properly seated. |
|
| • Ensure that the cart is properly seated. |
|
|
|
Paper Jams: | Lower paper path | Deselect offset or restart job. |
|
|
|
| High paper curl | • Adjust digital press decurler. |
|
| • Flip paper over in the paper tray being used. |
|
| • Rotate the paper in the paper tray being used. |
|
| • Switch to heavier paper. |
|
|
|
6 Accessories
DocuColor 5252 Operator Manual |
