Bosch Appliances D9412GV2 manual Fire Reports, Burglar Reports, Selection, Report Description

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 18

Fire Reports

To meet UL 864 requirements for Central Station and Remote Station applications, enable Fire Reports.

Selecting Yes enables a report to be sent when the event occurs.

Table 10: Fire Reports

Report	Selection	Report Description
	s
R# Fire Alarm	Yes, No	Fire Event
R# Fire	Yes, No	Fire restoral from
Restore		alarm
(Alarm)
R# Fire	Yes, No	Missing Fire point
Missing
R# Fire	Yes, No	Fire trouble
Trouble
R# Fire	Yes, No	Fire supervision
Supervis
R# Fire	Yes, No	Fire restoral from
Restore		trouble, missing, or
(T/M/S)		bypass
R# Fire	Yes, No	Canceled fire alarm
Cancel
R# Fire Sup	Yes, No	Fire supervisory
Miss		missing
R# Fire Supv	Yes, No	Restorals from Fire
Rest￿		Supervision

￿ This event is not reported when using BFSK format.

Burglar Reports

Select Yes to send a report when the event occurs.

Table 11: Burglar Reports

Report	Selections	Report Description
R# Alarm	Yes, No	Burglar Alarm Event
R# Burg	Yes, No	Non-fire restoral from
Restore		trouble, missing, or
		supervisory
R# Duress	Yes, No	Duress
R# Missing	Yes, No	Missing Alarm point
Alarm
R# Usr Code	Yes, No	User code tamper
Tmpr
R# Trouble	Yes, No	Trouble Event
Rpt
R# Missing	Yes, No	Missing Trouble
Trbl		Event
R# Non Fire	Yes, No	Non-fire Supervision
Suprv		Event
R# Pt Bus	Yes, No	Point bus failure
Fail
R# Pt Bus	Yes, No	Restoral of point bus
Rstl		after failure
R# Non Fire	Yes, No	Canceled non-fire
Cncl		alarm
R# Alarm	Yes, No	Non-fire restoral from
Restore		alarm
R# Sup	Yes, No	Supervisory missing
Missing
R# Unverified	Yes, No	Unverified Events for
Evt￿		Cross Points

￿R# Unverified Evt is not reported when using BFSK format. Additionally, this event does not produce a corresponding Restoral event.

R# Unverified Evt is sent when a single point programmed in Cross Point Group faults into an alarm condition, then restores before the Cross Point Time elapses.

R# Unverified Evt encompasses both Fire and Non-fire points, but is not related to the A# Verify Time used for smoke detectors.

The 9000GV2 Series control panels log a Ground Fault Event as Trouble Point 256.

Bosch Security Systems, Inc. 10/08 F01U003636-04