Bosch Appliances D9412GV2 manual A# Fail to Close, A# Restrictd O/C, Exit Dly Time

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 46

A# Fail to Close

Default:	No
Selection:	Yes or No
Yes	Fail to Close Report is sent for this
	area if the area is not armed when
	the Closing Window stop time occurs.
	Note:
	Program an exit delay time in
	Exit Dly Time.
No	Fail to Close Report is not sent for
	this area.
	• If Auto Close is programmed
	Yes, a Fail to Close Report is
	sent because it occurs when the
	Closing Window stop time
	occurred.
	• If Disable O/C in Window is
	Yes, the Fail to Close Report is
	followed by Closing Late or
	F(orce) Close Late.

This item determines if a Fail to Close Report is sent for this area. Use to determine if a user failed to arm the area before the Closing Window expires. Normal Opening and Closing Reports do not need to be programmed to use this feature.

A# Restrictd O/C

Default:	No
Selection:	Yes or No
Yes	Restrict Opening and Closing
	Reports for this area. A# Area O/C
	must be programmed Yes to
	generate Restricted Opening and
	Closing Reports.
	Note:
	If a passcode is not required for
	arming or disarming and this item
	is Yes, the area sends only
	Restricted Opening and Closing
	Reports. In this case, Restricted
	Reports are sent without User ID.
	Opening/Closing Window does not
	affect this report. Windows do not
	prevent sending Restricted Opening
	and Closing Reports from being sent.
	Early or late designations are not
	added to Opening or Closing Reports
	when they are sent according to the
	rules for Restricted Opening or
	Closing Reports.
No	Do not Restrict Opening and Closing
	Reports for this area.
	Regardless of programming in
	Authority Levels L## Restricted O/C,
	reports are not restricted in this area
	when this item is programmed as No.
	Note:
	Was Force Armed and Forced
	Close Events can still be sent to
	the central station if enabled in
	Routing when force arming the
	system.

This item determines if this area can restrict Opening and Closing Report activity.

A Restricted Opening Report refers to the control panel sending an Area Opening Report only when the area is disarmed after a non-fire alarm.

A Restricted Closing Report refers to the control panel sending a Force Closed Report only when the area was master armed with Controlled points that were faulted during the arming sequence. The sequence of reports generated by a restricted closing is: Was Force Armed, Forced Point, and Force Closed.

Bosch Security Systems, Inc. 10/08 F01U003636-04