Bosch Appliances D9412GV2 manual A# Acct O/C, Area

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 44

To suppress reports:

•Use Opening/Closing Windows to suppress reports for a specified period of time and then automatically turn them on again.

•Use the Restricted O/C options. A Closing Report is sent if the user is force arming, sending duress, or bypass arming. An Opening Report is sent if the user is disarming during an alarm condition or unbypasses points when disarming. If the system is normal, no Opening or Closing Report is sent.

For the scheduled suppression of Opening and Closing Reports, refer to Section 5.1.1 Opening and Closing) to define Opening and Closing Windows.

Account Opening and Closing Reports

Opening and Closing Reports are sent by account when the last area in a group of areas with the same account number(s) is armed.

Area Opening and Closing Reports

Closing Reports are sent for each area as it is armed. The account number is also sent for each area.

Customizing Account Opening and Closing Reports

You can eliminate area Opening and Closing Reports from selected areas in the account by programming A# Area O/C as No for those areas.

Combination Account and Area Opening and Closing Reports

To send both account openings and closings, and individual area openings and closings for all areas in the account, you must:

•Program A# Acct O/C as Yes for all areas in the account.

•Program A# Area O/C as Yes for all areas in the account.

Closing Reports: When areas in the account are independently armed, each area generates an Area Closing Report. When the last area is armed, it also generates an Account Closing Report.

Opening Reports: When the first area in the account is disarmed, it generates an Account Opening Report along with an Area Opening Report. When the remaining areas in the account are disarmed, each area generates an Area Opening Report.

Area Only Opening Closing Supervision Features

Use these features to supervise opening and closing activity by area. Auto Close, Fail To Open, and Fail To Close all work independently of the A# Acct O/C feature. To use these features, program O/C Windows.

Area

Default: 1

Selection: 1 to 8

Enter the area number you are programming.

A# Acct O/C

Default:	No
Selection:	Yes or No
Yes	Send Opening and Closing Reports
	by account.
	Use this selection if the control panel
	sends reports to an automation
	system that cannot interpret multiple
	Area Opening and Closing Reports,
	or if Modem Format is programmed
	as No in the Phone category (BFSK
	format is used and Opening and
	Closing Reports are enabled).
	An Account Opening Report is
	generated when the first area in an
	account is opened (disarmed). After
	the Account Opening Report is sent,
	disarming other areas in the account
	does not generate another Account
	Opening Report. An Account Closing
	Report is generated only when the
	last area in an account is closed
	(armed). Opening and Closing
	Reports for accounts do not contain
	any area information.
	Opening and Closing Windows
	affect Account Opening and
	Closing Reports: If an account
	opening or closing is generated while
	an Opening or Closing Window for
	this area is in effect, and Disable O/C
	in Window is programmed Yes, the
	report is not sent. Use the same
	opening and closing window times for
	all areas sharing the same account
	number.
No	Do not send Opening and Closing
	Reports by account.

Determines if this area generates Account Opening and Closing Reports. Program this item the same for all areas in the account.

Bosch Security Systems, Inc. 10/08 F01U003636-04