Bosch Appliances D9412GV2 ### Name, ### Mstr Site, ### Mstr Crd Data, ### SU1 through SU3 Site

D9412GV2/D7412GV2 Program Entry Guide 3.0 RADXUSR1/RADXUSR2

EN 87

U### Name

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter Alphabetic-characters A to Z in capital letters

Period (.), comma (,), percent (%), parentheses [()], equal (=), greater or less than (< >), exclamation (!), braces ({}), apostrophe (’), carat (^), grave accent (`), tilde (~), semi-colon (;), and colon (:) are not allowed.

Enter up to sixteen characters of text for this user group.

Programming this group with a departmental, team, or function name identifies all the users in this group in a function related manner, such as

ENGINEERING.

Card Data Format

The D9412GV2/D7412GV2 and D9210B Controller comply with the 26-bit Wiegand card data format. In essence, the format consists of 26 bits (3.2 bytes) of data. The first bit is used for the even parity. The next 8 bits (first byte) is used for the U### Site Code. The next 16 bits (second and third byte) are used for the U### Card Data. The last bit is used for the odd parity.

As long as the reader and the tokens or cards you use are compatible with 26-bit Wiegand format, they function with this system.

Use only the readers identified as being compatible with the D9210B door control module. Refer to the D9210B Operation and Installation Guide (P/N:

32206) for information on these readers.

For more information, refer to the Security Industry Association (SIA) Access Control 26-bit Wiegand Reader Interface Standard.

U### Mstr Site

Default: Blank

Selection: 000 = (0) to 254 or Blank (255)

Master User ### Site Data: Enter the first three decimal numbers on the back of the token or card. This is the first byte (bits 2 through 9) of data for a 26-bit Wiegand card. This is called the site number. Tokens and cards with a site code of 255 are not compatible with the D9412GV2/D7412GV2 Control Panels.

Converting hexadecimal to decimal: If your card label contains letters as well as numbers, the number is hexadecimal.* Convert the hexadecimal number to decimal using your calculator. If you cannot convert in this way, use the reader and the Add/Chg User? Function to add the tokens or cards.

Perform the following test to confirm that you can convert properly:

Use 319EB0 as the hexadecimal number. On your calculator, press [HEX]. Enter all the hexadecimal characters into the calculator. Press [DEC] and your hexadecimal characters convert to the following eight digits: 03251888. The site number is 032. Enter it in U### Mstr Site. Your card data is 51888. Enter it into U### Mstr Crd Data.

*A hexadecimal number can contain all numerals. If the code does not work, try converting the number from hexadecimal to decimal.

Always tag your tokens before adding them to the system so you do not mix them up. Use the CRD ID ###-# number to index them.

U### Mstr Crd Data

Default: Blank

Selection: 00000 = (0) to 65534 or Blank (65535)

Master User ### Card Data: Enter the remaining five decimal numbers on the back of the token or card. This is the second and third byte (bits 10 through 25) of data for a 26-bit Wiegand card. This is called the card data.

You must program U### Mstr Site before programming this prompt.

U### SU1 through SU3 Site

Default: Blank

Selection: 000 = (0) to 254 or Blank (255)

Sub-users one through three site data.

U### SU1 through SU3 C/D

Default: Blank

Selection: 00000 = (0) to 65534 or Blank (65535)

Card data for sub-users one through three.

Bosch Security Systems, Inc. 10/08 F01U003636-04