Bosch Appliances D9412GV2 manual P## Supervised, P## Scope, P## A1 through A8 in Scope

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 31

P## Supervised

Default:	No
Selection:	Yes or No
Yes	Only one printer can be installed for
	this P## SDI address.
No	More than one unsupervised printer
	can be installed using this P## SDI
	address and the same address DIP
	switch setting.

Supervise this SDI address. Generate Trouble SDI

##Reports and local trouble annunciation if a problem occurs with this printer or the SDI bus.

Unsupervised printers sharing the same address setting print the same text.

Trouble SDI ## Reports are always reported as Area 1, Account 1 Events regardless of where the SDI device is assigned.

When P## Supervised is set to Yes and all Printer Event Groups (such as P## Fire Events, P## Burglar Event, or P## Usr Chng Evt) are set to No, the control panel does not generate Trouble SDI ## Reports for the printer if the D9131A becomes disconnected.

P## Scope

Default:	No Printer
Selection:	No Printer, Area, Account, Panel
	Wide, Custom
Panel	Printer prints all designated events
Wide	that occur panel-wide. A panel-wide
	printer can cross account boundaries.
Account	Printer prints all designated events
	that occur within any area with the
	same account number in which this
	printer is assigned.
Area	Printer prints all designated events
	that occur in the area to which this
	printer is assigned.
Custom	Printer prints all events occurring in
	areas programmed Yes for this
	prompt regardless of any boundary
	restrictions.
No Printer	No printer installed at this address. If
	a printer is connected, data does not
	print.

Press the [SPACE] bar to scroll through the selections. Press [ENTER] when the correct selection appears in the display.

The following prompts are visible only when you program P## Scope to Custom.

P## A1 [through A8] in Scope

Default:	No
Selection:	Yes or No
Yes	Include Area # Events in the scope of
	this printer.
No	Does not include Area # Events in
	the scope of this printer.

Only available if P## Scope is programmed Custom. This program item determines if events occurring in an area print at this printer.

Refer to the report tables in Section 2.3 Routing on page 15 to identify the events that print. Events programmed as No in Routing still print at the local printer. Individual events within the report group cannot be suppressed for events printed at the local printer.

Bosch Security Systems, Inc. 10/08 F01U003636-04