Bosch Appliances D9412GV2 manual 5.2Skeds, UW# Xept Holiday, UW# Holiday 1 through, Sked Number

D9412GV2/D7412GV2 Program Entry Guide 5.0 RADXSKED

EN 115

5.1.3Holiday Indexes for User Group Windows

You can enable up to four Holiday Indexes to use with User Group Windows. Enable at least one Holiday Index if UW# Xept Holiday is programmed as Yes for this user window, or if you want this window to activate only on specific dates. Holidays are programmed in Holiday Indexes. Refer to Section

5.3Holiday Indexes on page 124 for programming information.

UW# Xept Holiday

Default: No

Selection: Yes or No

Determine if the window is disabled on holidays, or is active only on holidays. Use the instructions provided in the W# Xept Holiday prompt on page 111.

UW# Holiday 1 [through 4]

Default:	No
Selection:	Yes or No
Yes	The selected holiday index can be
	used by users in the User Group
	window.
No	The selected holiday index does not
	apply to users in this User Group.

5.2Skeds

Use the Skeds module to program the control panel to automatically execute functions that are otherwise started by the end user at the keypad. Each sked can be programmed to occur at a specific time on a specific date or day of the week. Up to 40 Skeds can be programmed.

A sked can be edited from the keypad if S## Time Edit? is Yes. The date and time can be changed using the Change Sked function.

Each sked number can be programmed with one of 24 functions for the S## Function Code. In addition to the function, a choice must be made as to what is affected by the function. For example, when choosing Function 2 (Disarm Sked), the disarming is the function and the selected areas are what is affected.

The functions and their associated parameters are listed in the Sked Function Code Table in the D9412GV/D7412GV2 Program Record Sheet (P/N: F01U003635), and they are explained in detail following the S## Function Code prompt on page 116.

Each sked can be programmed with up to four Holiday Indexes. The Holiday Indexes can execute the sked on the holidays as well as on the date or day(s) of the week, or, they can prevent the sked from executing on the holidays (refer to S## Xept Holiday prompt in this section ).

Sked Number

Default: 1

Selection: 1 to 40

Enter the number of the sked you are programming.

S## TimeEdit

Default:	Yes
Selection:	Yes or No
Yes	The user can edit the time of this
	sked from the keypad and
	determines if this sked appears in
	the CHG SKED display.
	The user cannot edit the time of this
No
	sked from the keypad and the sked
	does not appear in the CHG SKED
	display.

Select whether the user can edit the time of this sked from the keypad.

Bosch Security Systems, Inc. 10/08 F01U003636-04