Bosch Appliances D9412GV2 manual Route #, R# Primary Device, R# Backup Device, View Events?

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 17

Route #

Default:	1
Selection:	1 to 4
1	First group sent
2	Second group sent
3	Third group sent
4	Fourth group sent

Enter the number specifying the route group to program. The route represents the group you wish to send a group of reports. Group 1 is the first group to send a report and Group 4 is the last group to send a report. Each group has a primary and a backup device. The primary device is the first (most important) destination used to reach the programmed route within this group. The backup device is used if the primary device fails.

R# Primary Device

Default: Blank

Selection: Blank, 1 to 4

1		Phone 1 or SDI Path 1 is this
		group’s primary destination.
2		Phone 2 or SDI Path 2 is this
		group’s primary destination.
3		Phone 3 or SDI Path 3 is this
		group’s primary destination.
4		Phone 4 or SDI Path 4 is this
		group’s primary destination.
	To meet UL 864 requirements for
	Central Station and Remote Station
	applications, program a Primary
	Device.

Enter the number specifying the primary device.

R# Backup Device

Default: Blank

Selection: Blank, 1 to 4

1		Phone 1 or SDI Path 1 is this
		group’s backup destination if the
		primary destination fails.
2		Phone 2 or SDI Path 2 is this
		group’s backup destination if the
		primary destination fails.
3		Phone 3 or SDI Path 3 is this
		group’s backup destination if the
		primary destination fails.
4		Phone 4 or SDI Path 4 is this
		group’s backup destination if the
		primary destination fails.
	To meet UL 864 requirements for
	Central Station and Remote Station
	applications, program a Backup
	Device.

Enter the number specifying the backup device. The backup device is used when the primary device fails to reach the programmed destination.

View Events?

Default:		No
Selection:		Yes or No
Yes	Access each routing group and
		program individual events for this
		route group only (D5200).
No	Continue programming without
		viewing individual groups.

The D5200 Programmer reveals the following sub- prompts. Leaving View Events? as No allows the user to ignore a large area of programming that might not need to be changed.

Bosch Security Systems, Inc. 10/08 F01U003636-04