Bosch Appliances D9412GV2 manual Windows, # Sunday

D9412GV2/D7412GV2 Program Entry Guide 5.0 RADXSKED

EN 106

5.0RADXSKED

5.1Windows

Use this programming module to define the windows for Opening and Closing and User Access.

5.1.1Opening and Closing

Use these windows to set a schedule for disarming and arming. The disarming and arming schedules have several independent features:

•Suppress normal Opening or Closing Reports when A# Disable O/C in Windows is programmed as Yes.

•Generate a Fail to Open Report if the area is not disarmed on schedule when A# Fail To Open is programmed as Yes.

•Provide a warning tone and a PLEASE CLOSE NOW display at the keypad when it is time to arm the area.

•Generate a Fail to Close Report if the area is not armed on schedule when A# Fail To Close is programmed as Yes.

•Automatically arm the area at the end of the Closing Window when A# Auto Close is programmed as Yes.

Opening and closing schedules can be set up independently. For example, if you want to use features provided only by Closing Windows, leave times blank in the Opening Windows prompts and program Closing Window times.

A worksheet is provided at the end of this section for your convenience. Following the worksheet are examples of programmming Opening and Closing Windows for particular applications (refer to Table 38 on page 112 through Table 42 on page 113).

About the program record sheet: A column labeled Sked # is found in the program record sheet provided with the control panel. The numbers in that column appear in D6500 and D6600 reports and local printer reports when the window Begin Time executes.

Window selections 1 through 8 correspond with odd- numbered Skeds 41 through 55 for Open Window and correspond with even numbered Skeds 42 through 56 for Close Window. For example, when the Opening Window for Window 1 executes, a Sked 41 Executed event is generated. Refer to Table 34.

Table 34: Window Selections

Selectio	Sked #	Windo	Sked #	Windo
n		w		w
1	41	Open	42	Close
2	43	Open	44	Close
3	45	Open	46	Close
4	47	Open	48	Close
5	49	Open	50	Close
6	51	Open	52	Close
7	53	Open	54	Close
8	55	Open	56	Close

Window

Default: 1

Selection: 1 to 8

Enter the window number you want to program.

W# Sunday

Default:		No
Selection:		Yes or No
Yes	Activate this window on Sundays.
		Do not activate this window on
No
		Sundays.

This prompt and the next six day-of-the-week prompts select the days of the week the Opening and Closing windows are active.

Exceptions:

To prevent the windows from activating on certain days of the year, program Xept Holiday as Yes, and enable at least one Holiday Index. When Xept Holiday is Yes, the window executes on the days of the week programmed unless the Holiday Index designates the date as a holiday.

If Opening and Closing Windows are only needed on certain days of the year, do not program the windows to execute on any days of the week. Instead, program Xept Holiday as No and select a Holiday Index with the days of the year you want the window to be active.

Bosch Security Systems, Inc. 10/08 F01U003636-04