Bosch Appliances D9412GV2 manual Default, S## Door 1 through

D9412GV2/D7412GV2 Program Entry Guide 5.0 RADXSKED

EN 122

Default:		Blank
Selection:		1 to 11, 13 to 24, 28, 29
23	No Entry Events On: The		S## Door 1 [through 8]	Yes	Enable the sending
	control panel can log No Entry				of No Entry Events
	Events when an invalid token is		Default: No		for Door #.
	detected for a specific door. No		Selection: Yes or No	No	Do not enable the
	Entry Events include No Entry-
			This parameter enables the sending		sending of No
	Secured, No Entry-Interlock, No
	Entry-Unknown ID, and No		of No Entry Events for Door #.		Entry Events for
	Entry-Level. These events can				Door #.
	be directed to print at a local
	printer or send a report remotely
	through phone routing. This
	sked enables No Entry Events
	to be reported for Door #.
24	No Entry Events Off: The		S## Door 1 [through 8]	Yes	Enable the
	control panel can log No Entry				reporting of No
			Default: No
	Events when an invalid token is				Entry Events for
	detected for a specific door. No				Door #.
	Entry Events include No Entry-		Selection: Yes or No	No	Do not enable the
	Secured, No Entry-Interlock, No
			This parameter disables the sending		reporting of No
	Entry-Unknown ID, and No
					Entry Events for
	Entry-Level. These events can		of No Entry Events for Door #.
					Door #.
	be directed to print at a local
	printer or send a report remotely
	through phone routing. This
	sked disables No Entry Events
	to be reported for Door #.
28	Expanded Off-Normal Test Report: To generate this event, one or more points must be in an off-
	normal state at the time the sked executes. In addition, any system trouble that is active also
	generates an Expanded Off-Normal Test Report. Expanded Off-Normal Test Reports include the Off
	Normal Test Report Event as well as the supplementary event at the time the report is generated.
	The Event Log shows only a Test Report Event.
	If none of these conditions exists at the time the sked executes, only a Sked Executed Event is
	generated and the Off-Normal Test Report is not sent.
29	Non-ExpandedOff-Normal Test Report: Non-Expanded Off-Normal Test Report Events are only
	sent when any point is in the off-normal state from any area, but only sends the Off Normal Test
	Report Event. Any system trouble that is active also generates a Non-Expanded Off-Normal Test
	Report.
	The Event Log only shows a Test Report Event.
	If none of these conditions exist at the time the sked executes, only a Sked Executed Event is
	generated and the Non-Expanded Off-Normal Test Report is not sent.

To meet UL 864 daily Test Report requirements (when using two phone lines), you must still use Sked Function Code 9, Test Report and program it to occur on a daily basis as per AHJ requirements.

Bosch Security Systems, Inc. 10/08 F01U003636-04