Bosch Appliances D9412GV2 manual Phone Parameters, Modem Format, Default Yes Selection Yes or No

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 12

Phone 2

Default: Blank

Selection: Up to 24 characters (do not enter [SPACE])

Refer to the explanation of Phone 1. This number is Phone 2, referred to in the prompts in Section 2.3 Routing.

Phone 3

Default: Blank

Selection: Up to 24 characters (do not enter [SPACE])

Refer to the explanation of Phone 1. This number is Phone 3, referred to in the prompts in Section Section 2.3 Routing.

Phone 4

Default: Blank

Selection: Up to 24 characters (do not enter [SPACE])

Refer to the explanation of Phone 1. This number is Phone 4, referred to in the prompts in Section 2.3 Routing.

2.2Phone Parameters

The program items in this category describe panel- wide characteristics for telephone dialing, receiver format, and supervision.

Modem Format

Default:	Yes
Selection:	Yes or No
Yes	Modem IIIa2 Communication
	Format: Reports identify points as
	001 through 247 and pass-code User
	ID codes as 000 through 249 at the
	D6500 or D6600 Receiver (unless
	Point/User Flag is programmed Yes;
	refer to the Point/User Flag prompt
	in this section). When reporting point
	events, Modem IIIa2 Communication
	Format also sends point text to the
	D6500 or D6600 as programmed in
	Point Assignments.
No	BFSK (2300 Hz or 1400 Hz
	acknowledgment tone).

Central Station Receiver Format for Transmission of Reports: Modem format provides many reporting advantages over the BFSK format. Refer to the D6500 Report Directory (P/N: 74-04651-001) for more information about the effect of reporting formats.

Modem Format must be set to Yes when sending events over a network to a D6600 Receiver.

If Modem Format is No, assign a number to identify Duress Reports in BFSK Duress Code (page 15).

Bosch Security Systems, Inc. 10/08 F01U003636-04