Bosch Appliances D9412GV2 manual L## Security Level, L## Disarm Level, L## Function Level

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 76

2.11.5 Access Control Levels

L## Security Level

Default:	Refer to the program record sheet
Selection:	M, P, D, or Blank
M	Users have access rights for this
	area when the area is in any armed
	state.
P	Users have access rights for this
	area when the area is Perimeter
	Armed or Disarmed but not while the
	area is Master Armed.
D	Users have access rights for this
	area only while it is disarmed.
Blank	Users do not have access rights to
	this area.

Security Level [TOKEN FUNCTION]

When the user presents a token or card at the reader, access is granted only when the user has the authority to enter the area under certain armed conditions.

L## Disarm Level

Default:	Refer to the program record sheet
Selection:	I, D, or Blank
I	Users change the Master Armed
	state and Perimeter Armed state to
	Perimeter Instant. The armed state
	does not change in other areas, and
	the armed state does not change if
	the area is already in the perimeter
	instant or disarmed state. User
	needs access level for Master
	Armed (M) state.
D	Users change the local area’s
	Master Armed state and Perimeter
	Armed state to the Disarm state.
	User needs access level for Master
	Armed (M) or Perimeter Armed (P)
	state. All areas within the scope of
	the keypad assigned to the D# CC#
	Scope in the access handler, and
	areas to which the user has disarm
	rights, disarm as programmed.
Blank	Users do not have disarm rights in
	this area.

Burglar bells are silenced in the local area when a user disarms with a token or card or presents the token or card during an alarm. The user must use a pass code to silence a Fire Bell. Cancel Reports are sent after a valid pass code or token or card silences the bell.

Opening and Closing Reports are sent to the central station receiver if programmed.

For more information on programming this prompt for a shared area, refer to Access Control Readers Assigned to the Shared Area in Section 2.9.3 Shared- Area Characteristics on page 41.

L## Function Level

Default:	Refer to the program record sheet
Selection:	M, D, C, or Blank

MActivate the custom function assigned to the door in this area while the area is Master Armed or Disarmed only.

D	Activate the custom function
	assigned to the door in this area
	while the area is Disarmed only.
C	User can activate the custom
	function assigned to the door in this
	area while the area is Master Armed,
	Perimeter Armed or Disarmed.
Blank	User cannot activate the custom
	function assigned to the door in this
	area.
	When a token or card can also disarm an
	area, the custom function starts after the
	area disarms.
	A user does not require L## Security
	Level or L## Disarm Level authority to
	activate a custom function with a token or
	card.
	Tokens or cards that are used to execute
	Custom Functions must have a pass
	code assigned to the correspoinding
	User###.

Bosch Security Systems, Inc. 10/08 F01U003636-04