Bosch Appliances D9412GV2 manual D# Auto Door?, D# Fire Unlock?, D# Disarm on Open?, D# Card Type

D9412GV2/D7412GV2 Program Entry Guide 7.0 RADXAXS

EN 146

D# Auto Door?

Default:	No
Selection:	Yes or No
Yes	When the area assigned in D# Entry
	Area # is disarmed, the door is in
	the unlocked state. When that area
	is armed, the door returns to the
	locked state.
No	Door state is not affected by the
	armed state of the area.

Use this program item to automatically unlock the door (latched, shunt, and strike) when the entry area is disarmed. The door re-locks upon Master or Perimeter Arming the area.

The unlocked state cannot be overridden manually.

D# Fire Unlock?

Default:	No
Selection:	Yes or No
Yes	Relay activates and shunt is applied
	for the door contact automatically
	upon a Fire Alarm.
No	Door remains in its current mode
	upon a Fire Alarm.

Use this program item to activate the relay for the door strike and shunt the door zone automatically upon a Fire Alarm. This feature overrides a Secure Door state, Locked Door state, Auto Door, and an Interlock Faulted point. The relay activates for all doors with this prompt programmed as Yes when a Fire Alarm occurs in any area. Relays that are activated by Fire Unlock can be returned to normal only through the keypad using the Door Control function.

Doors that are activated by Fire Unlock must be returned to normal using the Door Control function on the keypad.

This command unlocks the door regardless of the armed state.

Each fire alarm that is generated causes a Door Unlocked – Automatic Event.

D# Disarm on Open?

Default:	Yes
Selection:	Yes or No
Yes	The area disarms only after the door
	is opened for a user with a valid
	disarm level.
No	The area disarms whether or not the
	door is opened as soon as a user
	with a valid disarm level presents a
	valid token or card.

Use this program item to determine if the door needs to be physically opened before disarming the area upon a valid access request. The user initiating the access request needs access levels that allow disarming with ID.

D# Card Type

Default:	0
Selection:	0 to 3
0	Card format is 26-bit Wiegand.
3	Do not use. Card format is 37-bit
	fidelity.

This item must be kept to a value of 0 (26 bit Wiegand format).

Bosch Security Systems, Inc. 10/08 F01U003636-04