Bosch Appliances D9412GV2 Custom Function, CF### Text, CF### Key Strokes, See .10.2 Area Text on

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 58

Consider the scope of the keypad used to access the Custom Function. Each Custom Function is enabled in the function menu by M## CC Address 1 [through 8] (refer to M## CC Address 1 [through 8] on page 78). If the Custom Function is not assigned to a specific keypad address, it does not appear in the menu.

Custom Function

Default: 128

Selection: 128 to 143

Enter the Custom Function number you want to program. You can program up to sixteen Custom Functions, which are numbered 128 to 143.

CF### Text

The keystrokes simulate any sequence of keystrokes the user can perform at a keypad. You can program up to 32 keystrokes for each Custom Function.

D5200 Data Entry

Use the [↓] key on the D5200 to move the cursor to the first data entry line. To enter more than sixteen keystrokes, you must fill the first line of the data entry line before you move to the second line. If you make entries on the second line, and the first line has less than sixteen characters, the second line clears when you press [ENTER].

The scope of the keypad where you access the Function List can affect the way the Custom Function operates.

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters.
	See Section 2.10.2 Area Text on
	page 57 for valid character entries.

Determines the menu text displayed at the keypad for the custom function item. Use this text to represent the functions performed by this menu item.

CF### Key Strokes

Table 25: CF### Key Strokes

Default:		Refer to the program record sheet
Selection		Up to 32 characters: 0 to 9, A, B, C, D, E
:
			D1255
Selection		D1255 Key	Faceplate		D1260 Key
			Label
0 to 9		0 to 9			0 to 9
A	[COMMAND]				[COMMAND￿]
B		[PREV]			NA
		(previous)
C		[ESC]	MENU	NA
		(escape)
D		[NEXT]			NA
E	[ENT] {enter}		YES	[#ENTER]
C1*		NA			(softkey 1)
C2*	NA			{softkey 2)
C3*		NA			(softkey 3)
C4*	NA			{softkey 4)
C5*		NA			(softkey 5)
C6*	NA			{softkey 6)
C7*		NA			(softkey 7)
C8*	NA			{softkey 8)

Figure 3: Softkey Locations on the D1260
	Keypad
	1				5
	2				6
	3				7
	4				8
			1	ABC 2	DEF 3
			GHI 4	JKL 5	MNO6
			PRS7	TUV 8	WXY 9
			COMMAND*	0	#
					ENTER
1 -	Softkey 1 (C1)	5 -	Softkey 5 (C5)
2 -	Softkey 2 (C2)	6 -	Softkey 6 (C6)
3 -	Softkey 3 (C3)	7 -	Softkey 7 (C7)
4 -	Softkey 4 (C4)	8 -	Softkey 8 (C8)

*Softkey selections are stored as two keystrokes.

Bosch Security Systems, Inc. 10/08 F01U003636-04