Bosch Appliances D9412GV2 2.11User Interface, 11.4 Authority Level, Selections on page, Commands

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 60

The D9000GV2 control panel series uses separate keystrokes to program the custom functions that accurately represent the two separate user interfaces, the D1255 and D1260 keypads.

Custom functions written for the D1255 that use the [PREV], [ESC], and [NEXT] keys do not work on the D1260.

Custom function written for the D1260 that use the softkeys (located on the sides of the keypad display) do not work when executed from the D1255 keypad.

2.11User Interface

Define which functions can be used by each of the fourteen user authority levels. Each user can be assigned the same or different authority level by area. The user has rights in the area where the keypad is assigned, based on the authority level assigned to the user’s pass code for that area.

When the pass code is entered at the keypad, the control panel checks the authority level. The control panel executes the function only in areas where the pass code has the authority to use the function.

2.11.1 Commands

Similar to command initiation used in other Bosch Security Systems, Inc. products, the Commands method provides continuity in the arming commands across product lines and makes an easy transition for dealers using other Bosch Security Systems, Inc. products. With commands, the end user presses [COMMAND] and then the numeral of the command to initiate. For example, [COMMAND][2] arms the perimeter of the area. Some prompts can be accessed only from a menu. These prompts are indicated by (Menu Function only). To access these functions, press [MENU], enter the function number, and use the [PREV] and [NEXT] keys to scroll through the choices.

The D9412GV2/D7412GV2 Program Record Sheet (P/N: F01U003635) lists the commands available with the system. Command numbers are shown in the column labeled Command. If a particular function does not have a command number, it can be accessed only through the Function List.

If you plan to use only commands to operate the system, and to arm and disarm by entering a pass code, you do not need to program Custom Function or Function List.

2.11.2 Keypad Selections

Programming choices in this section determine if keypad functions are disabled (blank), enabled (E), or passcode (P) restricted.

Press the [SPACE] bar to scroll through the selections. Press [ENTER] when the correct selection appears in the display.

Table 27: Keypad Programming Choices

Selection	Description
Blank	Disable the function panel-wide.
	The keypad shows NO
	AUTHORITY if you access the
	function using a command or the
	Function List.
E	Enable the function panel-wide.
	The function can be executed
	without entering a pass code.
P	Pass code required. When the
	pass code is entered at the
	keypad, the control panel checks
	the user’s authority level. Refer to
	Section 2.11.4 Authority Level
	Selections on page 67.

Refer to Section 2.11.4 Authority Level Selections on page 67 for a detailed description of the functions on the following pages. These parameters determine only if the authority level functions are pass-code protected.

Bosch Security Systems, Inc. 10/08 F01U003636-04