Bosch Appliances D9412GV2 manual CC# Scroll Lock, CC# Menu Key Lock, CC# Abort Display

D9412GV2/D7412GV2 Program Entry Guide 2.0 GV2MAIN

EN 56

CC# Scroll Lock

Default:	No
Selection:	Yes or No
Yes	Prevents the idle system status text
	from scrolling automatically.
	Requires user intervention to
	advance.
No	Allows the idle system status text to
	scroll automatically without user
	intervention

Use this parameter to enable a special non-scrolling option for the idle system status display text on a keypad. This keypad mode requires the user to press the PREV or NEXT key on the keypad to unlock the display and begin scrolling through the system status displays.

CC# Menu Key Lock

Default:	No
Selection:	Yes or No
Yes	If set to Yes, the user is prompted to
	enter a pass code after pressing the
	Menu key on the keypad. The items
	programmed in the Menu List for this
	specific keypad are filtered by the
	user’s authority level. Only those
	items in the menu list for which the
	user has authority appear.
No	If set to No, when the user presses
	the Menu key, all items that are
	programmed in the Menu List for the
	Command Center Address (Keypad
	Address) appear, regardless of the
	user’s authority level.

Determines if the Menu Key, when pressed, requires a pass code to access the functions.

If this parameter is set to Yes, users must enter a pass code after pressing the Menu key. When the pass code is validated, only those functions for which the user has authority appear in the list. If a function in the Menu List is pass-code protected (refer to Keypad Functions in Section 2.11.2 User Interface on page) the user does not need to enter the pass code again.

CC# Abort Display

Default:	Yes
Selection:	Yes or No
Yes	This keypad shows the Alarm
	Aborted message for all aborted
	alarms within its scope.
No	This keypad does not show the
	Alarm Aborted message for all
	aborted alarms within its scope.

This parameter enables or disables the ALARM NOT SENT message when an alarm is aborted before transmission occurs.

For SIA CP-01 Compliance

CC# Abort Display can be set to Yes or No.

CC# Cancel Display

Default:	Yes
Selection:	Yes or No
Yes	This keypad shows the Cancel
	Report Sent message for all canceled
	alarms within its scope.
No	This keypad does not show the
	Cancel Report Sent message for all
	canceled alarms within its scope.

This parameter enables or disables the CANCEL RPT SENT display message when an alarm is canceled after transmission occurs. To show this message, Cancel Report must be set to Yes. Refer to Cancel Report on page 36.

For SIA CP-01 Compliance

CC# Cancel Display can be set to Yes or No.

Bosch Security Systems, Inc. 10/08 F01U003636-04