Cisco Systems 2.1 manual Allowing Access to Network Services

2.In the list of Static IP addresses, find the hostname and IP address you want to delete and click Delete.

3.Click Commit.

Allowing Access to Network Services

The Services Router controls access to a list of the most commonly used services and applications such as e-mail and Web hosting. To allow access to a service, assign a static IP address to the computer that is providing the service (as described in the previous section), enter the device information in the Static IP tab, and then enable the static IP address that hosts that service. All incoming network traffic related to that application or service is forwarded to the specified computer.

You can allow access to the following network services and applications:

Port	Description
HTTP Web Host (Port 80)	Select the host name of the device that you want to serve
	standard Web pages.
Site FTP Host (Port 21)	Select the host name of the device that you want to act as a File
	Transfer Protocol (FTP) server.

96

Linksys One Communications Solution

8

Chapter

Chapter 8: Managing Data Devices

Allowing Access to Network Services