
Refer to the following table for a description of the information displayed in the Define Groups screen.
Field | Description |
|
|
Group Name | Name assigned to the group. The group name assigned here also appears on |
| the following screens: |
| • Users > Group Assignments |
| • Call Targets > Groups |
| • Call Targets > Voicemail Boxes (if “Group VM Enable” is checked) |
| • Call Targets > Inbound Trunks (if “Group Extension Enable” is |
| checked) |
| • Call Targets > Call Forwards (if “Group Extension Enable” is checked) |
| • Individual > User Template (if “Group Extension Enable” is checked |
| and the user is assigned in the Users > Group Assignments screen) |
| • Info (if a trunk is assigned to the group) |
|
|
Users | Number of users assigned to this group as specified in the Users > Group |
| Assignments screen. |
|
|
Group Extension | Allows you to enable group extensions, assign number of buttons, and choose |
| a Calling Line Identification (CLID) for the group. |
|
|
Enable | Enables or disables this group extension. When enabled, the group name also |
| appears on the Individual > User Template screen for a user assigned to the |
| group. Note: Even if a group extension is not enabled on this screen, the group |
| will still appear on the Users > Group Assignments screen; however, the group |
| extension must be enabled to assign the group button on the user’s phone. Even |
| though a group may be disabled, it still can be used as a filter for displaying |
| users with the Filter Users pulldown. |
|
|
Buttons | The number of buttons allocated to each user’s phone for this group. |
|
|
CLID | The CLID displayed on calls from this group. Note: For customers using local |
| trunks only, this field is not available. |
|
|
Group VM | Enables or disables a voicemail box for this group. Note: For external |
Enable | voicemail, a trunk must be assigned to the group in the Call Targets > Inbound |
| Trunks screen. |
|
|
Linksys One Communications Solution
6
Chapter
CLID is a telephony service that transmits the caller’s telephone number and in some places the caller's name to the called party’s telephone equipment during the ringing signal or when the call is being set up but before the call is answered.
24 | Chapter 6: Using the Phone Application |
| Setting Install Time Configuration |