Cisco Systems 2.1 manual Re-imaging the CPE, Restarting All Phones

Chapter

Linksys One Communications Solution

10
	Field	Description
	Last	The status of the last maintenance operation that was completed on the Service
	Maintenance	Router.
	Status
	Next	The time that the next maintenance operation will be performed on the Services
	Maintenance	Router.

To view the maintenance status of the Services Router:

•Click Maintenance.

To immediately the start maintenance operation on the Services Router:

1.Click Maintenance.

2.Click Start Maintenance.

Re-imaging the CPE

CAUTION: Clicking Force CPE Re- Image will delete all information from the Services Router and reset it to its default settings. This command will initiate a handshake process.

To re-image the Services Router:

•Click Force CPE Re-Image. The Services Router will be reset to its factory default settings.

Restarting All Phones

You can force all phones in the system to restart immediately by clicking Restart All Phones. This may be necessary if you have pending changes that you to want take effect after the phones have restarted.

Chapter 10: Using the Support View Screens	119
Re-imaging the CPE