Cisco Systems 2.1 manual Restarting the Services Router

Chapter

	Linksys One Communications Solution
10	Cleaning the Customer and Account Information from the Services
	Router

CAUTION: Clicking the Clean Customer Info and Account command will clean (delete) customer and account information from the Services Router and reset it to its default settings. This command will initiate a handshake process.

To clean Customer and Account Information and restart the Services Router:

•Click Clean Customer Info and Account (SVR will restart).

This command will clear the customer and account specific-information off the Services Router and restart the Services Router.

Restarting the Services Router

If you make site-wide changes to the database, you can immediately restart the Services Router and implement the changes. The Services Router (and all phones on the network) will briefly reboot as the changes take effect.

You can also restart the Services Router through the Support View screen as follows:

•Click Reboot SVR to restart the Services Router.

Alternatively, you can cycle power on the Services Router by doing either one of the following:

•Press the RESET button on the Services Router for less than 2 seconds OR

•Unplug the power cord and then plug the power cord back in.

IMPORTANT: You will not lose your configuration if you cycle power.

Chapter 10: Using the Support View Screens	117
Displaying Services Router Information