Quantum 3.5.2 manual Use this procedure to delete a stripe group, Deleting a Stripe Group

Chapter 6 Managing the File System

Working With Stripe Groups

•Realtime MB/sec (optional): The number of megabytes per second that are available to real-time applications. This is an optional setting and can be left blank.

•Non-realtime IO/sec (optional): The number of disk I/O operations per second that are available to non-realtime applications. This is an optional setting and can be left blank.

•Non-realtime MB/sec (optional): The lower threshold (in megabytes per second) that is reserved for non-realtime applications. This is an optional setting and can be left blank.

6Click OK.

7After the screen indicates that the stripe group has been modified, click Close.

	Use this procedure to delete a stripe group.
Deleting a Stripe Group

Caution: Deleting a stripe group causes a complete loss of data and requires re-making the file system. Refer to Making or Unmaking a File System on page 105.

1From the SNFS home page, choose Stripe Groups from the Config menu. The Configure Stripe Group screen (figure 69 on page 114) appears.

2Select from the File Systems drop-down menu the file system that contains the stripe group you want to delete.

3Select from the Stripe Groups list the stripe group you want to delete.

4Click Delete. A confirmation screen prompts you to confirm that you want to delete the stripe group.

5Click OK. The Delete Stripe Group Status screen appears.

6After the status screen indicates that the stripe group has been deleted, click Close.

StorNext User’s Guide 120