Chapter 6 Managing the File System
Performing File System Expansion
StorNext User’s Guide 155
6On the Data Stripe Group Selection screen, click Next to continue.
The New Data Stripe Group screen appears.
Figure 101 New Data Stripe
Group Screen
7Enter values for the New Stripe Group screen.
•Name field: The name of the stripe group.
•Select disks list: The disks available to assign to the stripe group.
You must select at least one disk for each stripe group.
Note: If you proceed without selecting the Perform metadump
option, you should manually perform a metadata dump
after file system expansion is finished to make sure your
backups do not fail. For information about performing a
metadata dump, see Performing a Metadata Dump on
page 13 3.