The proxy who Command
Using the Dynamic Resource Allocation Feature
Use the proxy who command to display the active disk distributed LAN connections for the specified host, which can be either a disk distributed LAN server or client. Output also includes average I/O statistics for each connection. The syntax for this command is proxy who hostname.
Command usage and output looks similar to this (both distributed LAN client and distributed LAN server output is shown):
snadmin (yy) > proxy who y FS 'yy'
Disk Proxy Client connection from 172.16.82.62 Remote address 172.16.82.62 port 1052 flags 0x2
Read 1.2 Mbytes/s, write 0.0 bytes/s
snadmin (yy) > proxy who fie FS 'yy'
Disk Proxy Server connection to 172.16.82.130 Remote address 172.16.82.130 port 1036 flags 0x1
Read 0.0 bytes/s, write 1.2 bytes/s
Using the Dynamic Resource Allocation Feature
Quantum recommends that you perform dynamic resource allocation using the StorNext GUI. However, if your operating system does not support using the GUI for this feature (or if you are operating in a failover environment,) you can accomplish the following tasks from the command line:
•Adding a Stripe Group Without Moving
•Adding and Moving a Data Stripe Group
•Moving a Metadata/Journal Stripe Group
StorNext User’s Guide | 371 |
