ip-address
mask
(OPTIONAL) Enter the next-hop address in dotted decimal
format and enter a mask in either dotted decimal or /prefix
format.
prefix-list (OPTIONAL) Enter the name of a prefix list name.
Defaults weight = 115
Command
Modes • ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage
Information
The administrative distance indicates the trust value of incoming packets. A low
administrative distance indicates a high trust rate. A high value indicates a lower
trust rate. For example, a weight of 255 is interpreted that the routing information
source is not trustworthy and should be ignored.
distribute-list in
Filter network prefixes received in updates.
S4820T
Syntax distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-
name in [interface] command.
Parameters prefix-list-
name
Specify the prefix list to filter prefixes in routing updates.
1038 Intermediate System to Intermediate System (IS-IS)