neighbor advertisement-start
To send BGP routing updates, set the minimum interval before starting.
S4820T
Syntax neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address}
advertisement-start command.
Parameters ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
seconds Enter a number as the time interval, in seconds, before BGP
route updates are sent. The range is from 0 to 3600 seconds.
Defaults none
Command
Modes
ROUTER BGP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
S4820T
Syntax neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-
group-name} allowas-in command.
448 Border Gateway Protocol