Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Related
Commands ip ssh server Configure an SSH server.
show ip ssh
client-pub-
keys
Display the client-public keys.
Usage
Information Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
Example If FIPS mode is not enabled:
Dell#ssh 10.10.10.10 ?
-c Encryption cipher to use (for v2 clients only)
-l User name option
-m HMAC algorithm to use (for v2 clients only)
-p SSH server port option (default 22)
-v SSH protocol version
<cr>
Dell#ssh 10.10.10.10 -c ?
3des-cbc Force ssh to use 3des-cbc encryption
cipher
aes128-cbc Force ssh to use aes128-cbc encryption
cipher
aes192-cbc Force ssh to use aes192-cbc encryption
cipher
aes256-cbc Force ssh to use aes256-cbc encryption
cipher
aes128-ctr Force ssh to use aes128-ctr encryption
cipher
aes192-ctr Force ssh to use aes192-ctr encryption
cipher
aes256-ctr Force ssh to use aes256-ctr encryption
cipher
Dell#ssh 10.10.10.10 -m ?
hmac-md5 Force ssh to use hmac-md5 HMAC algorithm
hmac-md5-96 Force ssh to use hmac-md5-96 HMAC algorithm
hmac-sha1 Force ssh to use hmac-sha1 HMAC algorithm
hmac-sha1-96 Force ssh to use hmac-sha1-96 HMAC algorithm
hmac-sha2-256 Force ssh to use hmac-sha2-256 HMAC algorithm
hmac-sha2-256-96 Force ssh to use hmac-sha2-256-96 HMAC
algorithm
With FIPS mode enabled:
Dell#ssh 10.10.10.10 ?
-c Encryption cipher to use (for v2 clients only)
-l User name option
-m HMAC algorithm to use (for v2 clients only)
-p SSH server port option (default 22)
700 FIPS Cryptography