Defaults Disabled
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
ipv6 nd ra-guard policy
Define the RA guard policy name and enter the RA guard policy list configuration mode.
Syntax ipv6 nd ra-guard policy policy-name
Parameters policy policy-
name
Enter the keyword policy then the policy-name. The policy
name allows a maximum of 140 characters.
Defaults none
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
managed-config-flag
Set the managed address configuration flag.
Syntax managed-config-flag {on | off}
To clear the flag, use the no managed-config-flag {on | off} command.
1230 Neighbor Discovery Protocol (NDP)