Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage
Information The time interval between hello packets must be the same for routers in a network.
Related
Commands ipv6 ospf dead-interval – specifies the time interval between hello packets was
received from a router.
ipv6 ospf priority
To determine the Designated Router for the OSPFv3 network, set the priority of the interface.
S4820T
Syntax ipv6 ospf priority number
To return to the default time interval, use the no ipv6 ospf priority
command.
Parameters number Enter the number as the priority. The range is from 1 to 255.
Defaults 1
Command
Modes
INTERFACE
Command
History Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information Setting a priority of 0 makes the router ineligible for election as a Designated
Router or Backup Designated Router.
Open Shortest Path First (OSPFv2 and OSPFv3) 1363