Dell 9.8(0.0) Policy-based Routing (PBR)

Policy-based Routing (PBR)

Policy-based routing (PBR) allows you to apply routing policies to specific interfaces. To enable PBR,

create a redirect list and apply it to the interface. After the redirect list is applied to the interface, all traffic

passing through the interface is subject to the rules defined in the redirect list. PBR is supported by the

Dell Networking Operating System (OS).

You can apply PBR to physical interfaces and logical interfaces (such as a link aggregation group [LAG] or

virtual local area network [VLAN]). Trace lists and redirect lists do not function correctly when you

configure both in the same configuration.

NOTE: Apply PBR to Layer 3 interfaces only.

NOTE: For more information , refer to Content Addressable Memory (CAM) chapter.

description

Add a description to this redirect list.

S4820T

Syntax description {description}

To remove the description, use the no description {description}

command.

Parameters description Enter a description to identify the IP redirect list (16

characters maximum).

Defaults none

Command

Modes

REDIRECT-LIST

Command

History Version Description

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

8.4.2.1 Introduced on the C-Series and S-Series.

1380 Policy-based Routing (PBR)